Asus 1U Rackmount Barebone Server RS120-E3 (PA4) - Manual (Page 121)

A S U S R S 1 2 0 - E 3 / P A 4 A S U S R S 1 2 0 - E 3 / P A 4 A S U S R S 1 2 0 - E 3 / P A 4 A S U S R S 1 2 0 - E 3 / P A 4 A S U S R S 1 2 0 - E 3 / P A 4 6 - 1 5 6 - 1 5 6 - 1 5 6 - 1 5 6 - 1 5
6.2.3 6.2.3 6.2.3 6.2.3 6.2.3 Adding or viewing a RAID configuration Adding or viewing a RAID configuration Adding or viewing a RAID configuration Adding or viewing a RAID configuration Adding or viewing a RAID configuration
You can add a new RAID configuration or view an existing configuration using
the V i e w / A d d C o n f i g u r a t i o n
V i e w / A d d C o n f i g u r a t i o n V i e w / A d d C o n f i g u r a t i o n V i e w / A d d C o n f i g u r a t i o n V i e w / A d d C o n f i g u r a t i o n command.
Adding a new RAID configuration Adding a new RAID configuration Adding a new RAID configuration Adding a new RAID configuration Adding a new RAID configuration
To add a new RAID configuration:
1. From the Management Menu, highlight Configure C o n f i g u r e C o n f i g u r e C o n f i g u r e C o n f i g u r e, then press .
2. Use the arrow keys to select V i e w / A d d C o n f i g u r a t i o n V i e w / A d d C o n f i g u r a t i o n V i e w / A d d C o n f i g u r a t i o n V i e w / A d d C o n f i g u r a t i o n V i e w / A d d C o n f i g u r a t i o n, then press
.
3. The ARRAY SELECTION MENU ARRAY SELECTION MENU ARRAY SELECTION MENU ARRAY SELECTION MENU ARRAY SELECTION MENU displays the available drives connected
to the SATA ports. Select the drive(s) you want to include in the RAID
set, then press . When selected, the drive indicator changes
from R E A D Y
R E A D Y R E A D Y R E A D Y R E A D Y to ONLIN A[X]-[Y] ONLIN A[X]-[Y] ONLIN A[X]-[Y] ONLIN A[X]-[Y] ONLIN A[X]-[Y], where X is the array number, and Y is
the drive number.
The information of the selected hard disk drive displays at the bottom of
the screen.