Asus 1U Rackmount Barebone Server RS120-E3 (PA4) User Manual
Page 25
2 - 9
2 - 9
2 - 9
2 - 9
2 - 9
A S U S R S 1 2 0 - E 3 / P A 4
A S U S R S 1 2 0 - E 3 / P A 4
A S U S R S 1 2 0 - E 3 / P A 4
A S U S R S 1 2 0 - E 3 / P A 4
A S U S R S 1 2 0 - E 3 / P A 4
2.3
System memory
2.3.1
2.3.1
2.3.1
2.3.1
2.3.1
DIMM sockets location
DIMM sockets location
DIMM sockets location
DIMM sockets location
DIMM sockets location
The system motherboard comes with four Double Data Rate II (DDR2) Dual
Inline Memory Modules (DIMM) sockets to support 240-pin DDR2 modules.
The figure illustrates the location of the DDR2 DIMM sockets:
2.3.2
2.3.2
2.3.2
2.3.2
2.3.2
Memory configurations
Memory configurations
Memory configurations
Memory configurations
Memory configurations
You may install 256 MB, 512 MB, 1 GB, and 2 GB unbuffered ECC or
non-ECC DDR2-533/667 DIMMs to the DIMM sockets.
•
Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules
from the same vendor. Visit the ASUS website for an updated DDR2
Qualified Vendors List for this motherboard.
•
Due to chipset resource allocation, and depending on the number of
expansion cards installed, the following conditions may occur:
- the system may detect less than 8 GB system memory when you
installed four 2 GB DDR2 memory modules
- may show an available memory space of less than 4 GB when
you installed four 1 GB DDR2 memory modules
•
Three DDR2 DIMMs installed into any three memory sockets will function
in Dual channel asymmetric mode.
•
When installing a single or two DIMMs, install the modules on the blue
slots (DIMM_A2/DIMM_B2). Refer to the recommended memory
configuration table below.
P5MT-R
®
P5MT-R 240-pin DDR2 DIMM sockets
DIMM_A1
DIMM_B2
DIMM_B1
DIMM_A2
1
12 Pins
128 Pins
M o d e
M o d e
M o d e
M o d e
M o d e
D I M M _ A 1
D I M M _ A 1
D I M M _ A 1
D I M M _ A 1
D I M M _ A 1
D I M M _ A 2
D I M M _ A 2
D I M M _ A 2
D I M M _ A 2
D I M M _ A 2
D I M M _ B 1
D I M M _ B 1
D I M M _ B 1
D I M M _ B 1
D I M M _ B 1
D I M M _ B 2
D I M M _ B 2
D I M M _ B 2
D I M M _ B 2
D I M M _ B 2
Single channel (1)
—
populated
—
—
(2)
—
—
—
populated
Dual channel (1)
populated
—
populated
—
(2)
—
populated
—
populated
(3)
populated
populated
populated
populated
Dual channel (1)
populated
populated
—
populated
(Asymmetric mode)
Recommended memory configurations
Recommended memory configurations
Recommended memory configurations
Recommended memory configurations
Recommended memory configurations