Asus 1U Rackmount Barebone Server RS120-E3 (PA4) - Manual (Page 138)

6 - 3 2 6 - 3 2 6 - 3 2 6 - 3 2 6 - 3 2 C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n
6.3.1 6.3.1 6.3.1 6.3.1 6.3.1 Creating a RAID 0 set (Stripe) Creating a RAID 0 set (Stripe) Creating a RAID 0 set (Stripe) Creating a RAID 0 set (Stripe) Creating a RAID 0 set (Stripe)
To create a RAID 0 set:
1. From the utility main menu, select 1 . C r e a t e R A I D V o l u m e 1 . C r e a t e R A I D V o l u m e 1 . C r e a t e R A I D V o l u m e 1 . C r e a t e R A I D V o l u m e 1 . C r e a t e R A I D V o l u m e, then
press . This screen appears.
2. Enter a name for the RAID 0 set, then press .
3. Highlight R A I D L e v e l R A I D L e v e l R A I D L e v e l R A I D L e v e l R A I D L e v e l, press the up/down arrow key to select
|R A I D 0 ( S t r i p e ) R A I D 0 ( S t r i p e ) R A I D 0 ( S t r i p e ) R A I D 0 ( S t r i p e ) R A I D 0 ( S t r i p e ), then press .
4. Highlight the D i s k s D i s k s D i s k s D i s k s D i s k s item, then press to select the hard disk
drives you want to include in the RAID set. The S E L E C T D I S K S S E L E C T D I S K S S E L E C T D I S K S S E L E C T D I S K S S E L E C T D I S K S screen
appears.
5. Use the up/down arrow key to highlight a drive, then press to
select. A small triangle marks the selected drive. Press after
completing your selection.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[ CREATE ARRAY MENU ]
[ DISK/VOLUME INFORMATION ]
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
cannot contain special characters.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Volume0
RAID0(Stripe)
Select Disks
128KB
0.0 GB
Create Volume
[ SELECT DISKS ]
[ ↑ ↑ ↑ ↑ ↑↓ ↓ ↓ ↓ ↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
Port Drive Model Serial # Size Status
0 XXXXXX XXXXXX XX.XGB Non-RAID Disk
1 XXXXXX XXXXXX XX.XGB Non-RAID Disk
2 XXXXXX XXXXXX XX.XGB Non-RAID Disk
3 XXXXXX XXXXXX XX.XGB Non-RAID Disk
Select 2 to 4 disks to use in creating the volume.
[ ↑ ↑ ↑ ↑ ↑↓ ↓ ↓ ↓ ↓]-Select [ESC]-Exit [ENTER]-Select Menu