Controlled Products Systems Group 0-205679 - Manual (Page 82)

4.5 Using the
Printing Features The prox.pad plus unit in conjunction with the op-
tional IEI PDA Data Collection Device (DCD) can cap-
ture a Transaction Log and a Programmed User List
via the IR port. The Log Dump command is:
70 # 0 # 0 # **
The User Dump command is:
25 # 0 # 0 # **
4.5.1 Selecting
Transaction Log
Information
You can selectively program specific transaction events
to print or not on the Transaction Log. By “masking”
out certain events, you direct the unit not to save those
events in memory and thus not be available for the
log. The factory default is for all transaction events to
be saved in memory and printed on the log. To turn
OFF an event (keep it from being logged), enter:
73 # Event Code # 0 # **
To turn an event ON, enter:
73 # Event Code # 1 # **
Event # Description
1 access denied - invalid PIN
2 program denied
4 REX
5 Propped Door
6 Door Closed
7 Forced Door
16 log dumped by user #N
17 access granted to user #N
19 access denied to user #N, bad timezone
20 toggle mode activated by user #N
(latch set)
21 toggle mode de-activated by user #N
(latch clear)
22 1st in auto-unlock triggered by user #N
23 door relocked by user #N
24 user lockout enabled by user #N
25 user lockout disabled by user #N
26 access denied to user #N - user is
disabled
Chapter 4: Programming 4.5 Using the Printing Features
4-30 prox.pad plus Install/Program. Manual, PPP, D4b
Part No. 6105679, Rev. 1.1