Controlled Products Systems Group PR-112S-A User Manual

Enforcer, Pr-112s-a, Manual

ENFORCER Stand-Alone Proximity Reader Manual

• Check the power connection.
• Check the power supply.

• Make sure you are using a valid user card.
• Make sure the relay is not in toggle mode.
• Make sure you are using the correct relay output (either N.O. or N.C.).

• Set a longer door-release time.

• Make sure you are using a N.O. switch.
• Double-check the door-release time.
• Double-check the relay toggle mode.

Troubleshooting:

The LED does not light:

The relay does not activate

The relay time is too short

Egress button not working

ENFORCER

●

Stand-alone operation

●

Sealed and weatherproof (IP67)

●

Tri-color LED status bar

●

Up to 100 user cards

●

Up to 5 master cards

●

Includes 10 blank cards

Note: Products with model numbers that end with "Q" or that have a round green "Q" sticker are RoHS compliant

PR-112S-A

MiPR-1125-A_1302.pmd

SECO-LARM U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326

Website: www.seco-larm.com
E-mail: [email protected]

WARRANTY

This SECO-LARM product is warranted against defects in material and workmanship while used in

normal service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s

obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to
SECO-LARM.

This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,

repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines
that such equipment is not operating properly as a result of causes other than defects in material and workmanship.

The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only,

at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damages of any kind to the purchaser or anyone else.

NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right
to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2013 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in
whole or in part, without the written permission of SECO-LARM.

WARNING: Incorrect mounting which leads to exposure to rain or moisture inside the enclosure could cause a
dangerous electric shock, damage the device, and void the warranty. Do not open the case of this device, as there are
no field-serviceable components inside.

Stand-Alone Proximity Reader

Manual

SECO

SECO-LARM

-LARM