Controlled Products Systems Group RAM300 - Manual (Page 26)

RAM 300
RAMSET
24
www.ramsetinc.com
Ask your technician about all the features of our
new Ramset operator.
Safety devices, such as reversing loops,
phantom loops, photo eyes, or miller edges
must be installed on your gate before the
operator may be used. Ask your technician
which safety devices best suit your safety needs.
Read your warranty certificate and fill out your
warranty extension card. Return the warranty
card, via certified mail, to Ramset within 90 days
of purchase:
Ramset Automatic Gate Services, Inc.
9116 De Garmo Ave.
Sun Valley, CA. 91352
Never let children operate or play with gate
controls. Keep the controls away from children.
The entrance is for vehicles only. Pedestrians
should use a separate entrance.
Always keep people, children and objects away
from the gate while the gate is in operation. No
one should cross the area of a moving gate.
Use the emergency release only when the gate
is not moving & power is turned off to the unit.
Have the technician give you a demonstration of
how to use the emergency release.
Keep gates properly maintained. Have a
qualified gate technician service the gate
operator and gate hardware every six months to
a year. This includes checking of safety devices,
E.R.D. and battery back up systems.
Warning signs must be placed on every gate in a
highly visible area.
To reset the audible alarm on the gate operator
you must turn the power of the unit off for
approximately 10 seconds, then back on.
Always keep a good relationship with your
technician and keep his or her number handy
for future maintenance or emergencies.
IMPORTANT INFORMATION FOR ThE hOMEOwNER
Ramset wishes to thank you for trusting
us to meet your gate operator needs