Controlled Products Systems Group CSW24V - Manual (Page 23)

21
DUAL GATES ONLY
DUAL GATES ONLY
WIRING
WIRELESS DUAL GATES
ALARM RESET
Turn on power to the operator.
TO ACTIVATE THE WIRELESS FEATURE:
1
Choose an operator to be the network primary operator. All wireless
accessories will need to be programmed to the primary operator.
2
Press and release the LEARN RADIO button on the primary operator. The
green XMITTER LED will light.
3
Press and release the LEARN RADIO button again on the primary
operator. The NETWORK LED will light.
4
Press and release the OPEN test button to assign this operator as
network primary.
5
Press and release the LEARN RADIO button on the second operator. The
green XMITTER LED will light.
6
Press and release the LEARN RADIO button again on the second
operator. The NETWORK LED will light.
7
Press and release the CLOSE test button to assign this operator as
network second.
Both operators will beep and the NETWORK LEDs will turn off indicating
programming is successful.
TO DEACTIVATE THE WIRELESS FEATURE:
1
Press and release the LEARN RADIO button on either operator. The
green XMITTER LED will light.
2
Press and release the LEARN RADIO button again on the same operator.
The yellow NETWORK LED will light.
3
Press and hold the LEARN RADIO button for 5 seconds. The yellow
NETWORK LED will blink (operator will beep) then turn off indicating
successful deactivation.
Repeat the steps for the other operator.