Controlled Products Systems Group AOMSL100 - Manual (Page 22)

ON
514
GDE
ON
514
GDE
ON
514
GDE
ON
514
GDE
ON
514
GDE
ON
514
GDE
ON
514
GDE
1
234
56
78
1
2
3
4
5
6
7
8
-----------------------OPEN------------------------
TIMER
RADIO
OSC
1-PASS
SLAVE
BRAKE
SPARE
LOCK
OFF ON
For MAGNETIC LOCK set “ ” Dip Switch to the
“ ” Position.
For SOLENOID LOCK set “ ” Dip Switch to the
“ ” Position.
LOCK
ON
LOCK
OFF
MAG
LOCK
SOLENOID
LOCK
Step Down
Transformer
MAGNETIC/SOLENOID LOCK
CONNECTIONS
Magnetic lock installation requires a step down transformer with appropriate voltage for the
specific lock accessory.
and from terminal strip supply 110 volts to power the transformer
and control the locks’. Connect low voltage wires from transformer directly to the lock as shown
below. Only two wires needed for the installation.
See text box below for Dip Switch settings.
No relay wires required.
AC-N LOCK
41