Controlled Products Systems Group 1603-080 - Manual (Page 36)

1603-065-N-7-11 34
9.4 Accessories Parts List
The following accessories are available for the 1603 barrier gate operator.
Loop Detector - Plug directly into ports on circuit board simplifying wiring.
P/N 94010-010 - Single channel detector.
P/N 9409-010 - Two channel detector.
Loop Wire - XLPE insulation is available in 500 and 1000 foot rolls, available in Black, Blue and Red insulation.
Loop Sealant - P/N 2600-771 Asphalt, P/N 2600-772 Concrete
Meg Ohm Meter - Checks the integrity of ground loops. P/N 9401-045
Reverse Edge - Installs on the bottom of the aluminum arm. P/N 8080-016
Photo Cell - Prevents arm from lowering on vehicles or pedestrians. P/N 8080-018
Time Clock - 7 and 365 day clocks, used to automatically open gate at pre-set time, fits inside operator.
P/N 2600-791 7 day clock
P/N 2600-795 365 day clock
Surge Devices - Helps prevent circuit board failure caused by lightning strikes and power surges.
P/N 1876-010 - High Voltage
P/N 1878-010 - Low Voltage
Replacement Battery - Convenience open system. P/N 1801-009 (2 required)
Speed Bump - Prefabricated 6-foot speed bump reduces traffic speed through gate system. P/N 1610-150
Heater Kit - Thermostatically controlled heater for cold weather areas. P/N 1601-092
Fan Kit - Thermostatically controlled fan for hot humid environments. P/N 1601-093
Manual Gate Control Toggle - Allows user to manually operate gate arm. Fits inside single-gang electrical box. P/N 1200-017
Interconnection Cable - Interconnection cable contains all the necessary wires to interconnect primary / secondary operators.
Cable length: 30 ft. - P/N 2600-755 40 ft. - P/N 2600-756 50 ft. - P/N 2600-757
Gate Tracker™ - Optional control board allows the barrier gate operator to report activity to a companion 1833, 1835, 1837 or
1838 access control system.
Auto Spike System Parts
2 Ft Extension Section - 2 Ft extension shaft, tunnel plate and ramps. P/N 1603-192
3 Ft Extension Section - 3 Ft extension shaft, tunnel plate and ramps. P/N 1603-193
3 Ft Spike Section - 3 Ft spike shaft, tunnel plate and ramps. P/N 1603-073
End Cap - P/N 1603-118
Connector Shaft - P/N 1603-069
Aluminum Arm - 14-foot replacement aluminum arm. P/N 1601-071
Aluminum Folding Arm Assembly - Low headroom applications (Arm included). P/N 1601-310
Aluminum Arm Mounting Kit - Arm mounting bracket and hub. P/N 1601-242
Arm Padding - Foam padding for the aluminum or wood arm. P/N 1601-211
Lighted Auto Spike Warning Sign - Backlit spike warning sign with adjustable light for spike illumination. P/N 1615-081
Traffic Light (Red, Green) - Manage the traffic flow with red-green lights. Bolts onto the 1603 operator. P/N 1603-210