CNB NXE3055VR - Manual (Page 42)

XNET User Manual
42 / 54
ITEM DESCRIPTION
SNMP
Enable SNMP Enables / Disables SNMP.
Read
Community
Sets the keyword for right to read only when accessing to SNMP. Up to 64
letters(alphabets/arabic numerals) are available.
Write
Community
Sets the keyword for right to write only when accessing to SNMP. Up to 64
letters(alphabets/arabic numerals) are available.
Location
Sets information on the system's location available to read and write. Up to
46 letters(alphabets/arabic numerals) are available.
Contact
Saves the email address available to contact about the system. Up to 46
letters(alphabets/arabic numerals) are available.
SNMP Port Enter the SNMP port, default SNMP port is 161.
SNMP Trap
Enable SNMP
Trap
Enables / Disables SNMP Trap.
Traps are used by the camera to send periodic messages to a
management system as a Heartbeat.
Trap Port Enter the SNMP trap port, default SNMP port is 162.
Trap Address Enter the IP address of the management server.
Trap
Community
Community to use when sending a trap message to the management
system.
Trap Interval Interval between two traps in seconds.
Save - Applies and saves the configurations.
Reset - Recalls previously the saved configurations.