CNB NXE3055VR - Manual (Page 34)

XNET User Manual
34 / 54
ITEM DESCRIPTION
IP Filter
Address List
List Displays list of currently established IP Filters.
Add
Adds an IP address to filter out.
Enter the IP address and click【 Add 】 button to add it to『IP Address
List』Box.
The updated list can be viewed in『IP Address List』Box.
- Up to 20 IP addresses can be added.
- Duplicate IP address, Location Hostname, Default Router, Subnet
Mask, DNS1 and DNS2 can not be inputted.
Remove
Removes an IP address from『IP Address List』Box.
Select the IP address to remove and click【
Remove 】 button to
remove it from the list.
The updated list can be viewed in『IP Address List』Box.
IP Filter
Enable
Enable
IP Filtering
Turns the IP Filter on or off.
IP Filtering
Mode
Select IP Filtering Mode between accept and block.
This can select between Accept | Drop when『Enable IP Filtering』
turned on.
In Accept Mode, XNET product will be accessed from the IP addresses
in 『 IP Address List 』 box.
In Drop Mode, XNET product will not be accessed from the IP
addresses in 『 IP Address List 』 box.
Save - Applies and saves the configurations.
Reset - Recalls previously the saved configurations.
In case of using IP Filter Accept function, Please need to remember IP addresses in『IP
Address List』Box.
Must restore to the original state from H/W Factory Reset because can’t connect in web
page when Accept IP addresses does not remember.