CNB NXE3055VR User Manual

Page 29

XNET User Manual

29 / 54

ITEM

DESCRIPTION

Gamma

Select the Gamma value of Video between 0.35 and 1.00

Day/Night

Switch the mode related to the Day/Night.

Select among Auto, Color, B/W and Intelligent.

Day/Night Level

Select the Level generated by a switch of Day/Night mode.
Select among Low, Middle, and High.

Day/Night Delay Select the Delay Time generated by a switch of Day/Night mode.

Select among values from 3 to 20.

Exposure

Setting

Lens Type

Select the Lens Type between Electronic and DC.

Brightness

Select a proper value for brightness of recorded display.

This can only be enabled when Lens Type is configured as DC mode,

Indoor mode.
You can choose it among values from 0 to 20.

DC Level

Select the DC level value of Video between 0 and 20.

CET WGT

Select the CET WGT value of Video between 0 and 20.

AGC

Select the Gain value of Video between 0 and 20.

Flickerless

Select On or Off for reducing Camera’s flickering.

DSS

Select DSS between Off / x2 / x3 / x4.

Shutter Speed

Configures Camera’s Shutter Speed.

(A minimum value is recommended.)

High Shutter Speed can capture a quick movement accurately, but

Video gets noisy while it tries to maintain brightness level properly.
Low Shutter Speed reduces Video Noise, but it will not catch quick

movement very well.

This can only be enabled when Lens Type is configured as DC mode.

Mode

Select Indoor or Outdoor for Lens mode.

This can only be enabled when Lens Type is configured as DC mode.

Special

Setting

BLC / WDR

Configures about the BLC function and the WDR function.
(BLC: BackLight Compensation, WDR: Wide Dynamic Range)

In case of using the BLC function, a damaged image from backlight

can be compensated.

In case of using the WDR function, it provides clear images even

under backlight circumstances where intensity of illumination can

vary excessively when there are both very bright and very dark areas
simultaneously in the field of view of the camera.

It is available to select among Off | WDR | BLC.

In case of WDR mode use, Video Out function can’t use

in Video Page.