CNB NXE3055VR - Manual (Page 17)

XNET User Manual
17 / 54
ITEM DESCRIPTION
Maintain
Server
Restart Restarts the system. It takes about 45 seconds.
Light Default
Resets all parameters except for TCP/IP, HTTP, QoS, and SNMP
setting.
This will be followed by a 45 seconds system reset.
Factory Default
Resets all parameters to Factory Default setting.
This will be followed by a 45 seconds system reset.
Delete Log
Files
Delete Logs Delete all saved Log Messages.
Backup Backup
This saves current camera’s configurations to Client PC as file
(xnetconfig.dat).
Restore Restore
This loads up settings from a saved Backup file.
Click 【 Restore 】 button after selecting backup files in Client PC.
Optional check boxes can be used to select settings to be excluded
from the restore process.
『
except TCP/IP, HTTP, QoS, and SNMP parameters』
『 except Camera Condition parameters』
『 except Users parameters』
『 except IP Filter parameters』
『 except Motion Detection parameters』
This will be followed by a 45 seconds system reset.
System
Update
Upgrade
Use this to update the system.
Select location of Update file in Client PC and click【 Update 】 button.
This will be followed by 45 seconds system restart.
Upgrade File can be downloaded from http://www.cnbtec.com.
Please do not disconnect power and LAN cable from the
XNET while the upgrade is in process.
It might cause a system error.