beautypg.com

Enjoy your new lights – Kolpin 97950 – HID Lights User Manual

Page 3

background image

Rev.1

Kolpin Outdoors, Inc., 205 N. Depot Street, Fox Lake, WI Phone #: (877) 9KOLPIN or (920) 928-3118

www.kolpin.com

[email protected]

triangle plug. You only need to plug in one side, and it is usually within 12” of
wire back from the stock headlight.

-

Plug ballast plugs into ballast, taking care to plug in with correct polarity. They
should only go in correctly with a ramped clip retainer on one side, but they can be
forced incorrectly.

-

Attach the Red to the positive on the battery and the Black to the battery or any
good ground on the chassis.


- Connect the hi/lo control wires to the bulbs. Each bulb should have a

small

plug with 2 wires in it. Connect the bulbs to the plugs in the wire harness that match.
Each bulb should have 3 connections; positive, negative, and hi/lo control.

-

Secure everything with zip ties and make sure ballast are securely mounted.



Enjoy your new lights!!