Kolpin 21511_21512 – KXP Rhino Grip XL - Manual (Page 2)

Rev. 1
Kolpin Outdoors, Inc., 205 N. Depot Street, Fox Lake, WI Phone #: (877) 9KOLPIN or (920) 928-3118 www.kolpin.com [email protected]
21512 Parts List:
Item Description Quantity
1 Rhino Grip XL 2
2 Rhino Grip Base 2
3 Kwik Clip 2
4 Nylon Washer 2
5 Large Rubber Expander 2
6 Plastic Spacer 2
7 Small Rubber Expander* 2
8 Threaded Rod 2
9 Rubber Strap 2
10 Thumb Screw 2
21512 Assembly:
1. Place the Smaller rubber expander on the threaded rod.
* NOTE: the rubber expander for both systems has a counter-
bored relief that mates to the threaded rod. Please be sure to
install correctly!
2. Slide the plastic spacer onto the threaded rod.
3. Slide the larger rubber expander onto the rod.
4. Place the nylon washer on top of the large rubber expander
and thread the rod into the threaded insert in the bottom of
the base.
5. Place the expander in the Lock & Ride hole on the bed rail and
twist the base clockwise. As you twist the threaded rod will
compress the rubber expanders and secure the grip to your
Polaris Ranger.
6. Place the Rhino Grip into the base, orient the grip as desired
and secure with the Kwik Clip.
7. To remove, simply turn the base counter clockwise and remove
from the bed rail.
8
6
7
5
3
1
2
4
4
10
Kolpin now offers many accessory options for Polaris ATV and UTV models. For a complete listing of these KXP
accessories and Kolpin’s KXP Plungers that are compatible with Polaris® Lock & Ride® System, be sure to check
out www.kolpin.com , as new items will be coming soon.