Kolpin 21511_21512 – KXP Rhino Grip XL - Manual

Rev. 1
Kolpin Outdoors, Inc., 205 N. Depot Street, Fox Lake, WI Phone #: (877) 9KOLPIN or (920) 928-3118 www.kolpin.com [email protected]
21511-21512
–
KXP Rhino Grip XL
21511 Parts List:
Item Description Quantity
1 Rhino Grip XL 2
2 Rhino Grip Base 2
3 Kwik Clip 2
4 Nylon Washer 2
5 Rubber Expander* 2
6 Threaded Rod 2
7 Rubber Strap 2
8 Thumb Screw 2
6
2
1
4
5
3
21511 Assembly:
1. Place the rubber expander on the threaded rod.
Place the nylon washer on top of the rubber
expander and thread the rod into the threaded
insert in the bottom of the base.
* NOTE: the rubber expander for both systems
has a counter-bored relief that mates to the
threaded rod. Please be sure to install
correctly!
2. Place the expander in the Lock & Ride hole and
twist the base clockwise. As you twist the
threaded rod will compress the rubber
expander and secure the grip to your
Sportsman ATV Rack.
3. Place the Rhino Grip into the base, orient the
grip as desired and secure with the Kwik Clip.
4. To remove, simply turn the base counter
clockwise and remove from the ATV Rack.
8
Kolpin now offers many accessory options for Polaris ATV and UTV models. For a complete listing of these KXP
accessories and Kolpin’s KXP Plungers that are compatible with Polaris® Lock & Ride® System, be sure to check
out www.kolpin.com , as new items will be coming soon.