beautypg.com

Kolpin 86850 – TOW BEHIND DISC User Manual

Page 8

background image

Rev. 1

10. Now that the Main Bearing Carrier is on, place the Small Diameter Spindle so that
the open end is touching the bearing, as shown in the picture below.


11. Next, slide on the final Disc. Then place the final Large Diameter Spindle on the
Disc so that the flange is touching the Disc as shown below.

12. The final step is to secure the whole disc together. Place the ¾” Washer and Nut
onto the end and tighten the disc securely. NOTE: After the first use check the
tightness of the system. Usually after the first use the disc will become slightly loose as
the metal components mesh together. Retighten the system before each use, as a loose
Disc will cause unnecessary wear and tear on the components.


13. Repeat steps for the opposite Disc!

Kolpin Outdoors, Inc.

205 N. Depot Street, Fox Lake, WI 53933

Phone #: (877) 9KOLPIN or (920) 928-6514

www.kolpinpowersports.com

[email protected]