beautypg.com

Kolpin 86850 – TOW BEHIND DISC User Manual

Page 7

background image

Rev. 1

9. This next part proves to be a little tricky and may require the help of another person
to help support the disc. The Main Bearing Carrier needs to go on the axle, but so do all
the components sandwiched in the middle of the Bearing Carrier. First, start the Bearing
Carrier onto the square axle (9a.). Next, the Small Diameter Spindle goes on so that the
open end of the spindle is touching the bearing as shown (9b.). Then, set the disc on
top of the Small Diameter Spindle and start lowering the assembly onto the axle (9c).
Lastly, slide the Large Diameter Spindle onto the disc so that the flange is touching the
disc, as shown below (9d.). Below is a broken down series of pictures to help illustrate
how the assembly is to go together.

(9a.)

(9b.)





------------------------------------------------------------------------------------------------


(9c.)

(9d.)