INTELLINET NETWORK 525251 300N High-Power PoE Access Point User Manual User Manual

Page 36

Here are descriptions of every setup item:

Band

Select the wireless band you wish to use. By

selecting different band settings, you’ll be able

to allow or deny the wireless client of a certain

band.

If you select 2.4 GHz (B), 2.4 GHz (N) or 2.4

GHz (G), only wireless clients using the

wireless band you select (802.11b, 802.11 N or

802.11g) will be able to connect to this access

point.

If you select 2.4 GHz (B+G), then only wireless

clients using 802.11b and 802.11g bands will

be able to connect to this access point.

If you want to allow 802.11b, 802.11g and

802.11 N clients to connect to this access

point, select 2.4 GHz (B+G+N).

Channel

Number

Select a channel number you wish to use. The

channel number must be the same as another

wireless access point you wish to connect

MAC address 1

Input the MAC address of the wireless access

point you wish to connect.

Set Security

Click this button to select an encryption mode

for this wireless link. A new popup window will

appear. Refer to Section 2-7 for detailed

descriptions.

This manual is related to the following products: