INSTEON I/O Linc (2450) Manual - Manual (Page 14)

Page 14 of 16
Problem Possible Cause Solution
The controller or
responder and I/O Linc
may be on opposite power
line phases.
Make sure two dual-band INSTEON devices are
properly installed to bridge the two power line
phases.
The INSTEON signal may
be too weak.
Add additional INSTEON devices or move around
existing INSTEON devices. All INSTEON devices
act as INSTEON network repeaters.
Large appliances, such as
refrigerators or air
conditioners, may be
producing electrical noise
on the power line.
Install a power line noise filter (#1626-10) to filter
electrical noise and minimize signal attenuation.
Other electrical devices,
such as computers,
televisions, or power
strips, may be absorbing
the INSTEON signal.
I/O Linc is taking a
long time to respond
to a Controller.
The controller may be
sending commands to a
responder that is no
longer in use. Commands
for the unused responder
are being resent and
loading down the signal.
Unlink any unused responders from the Controller.
HINT: If you are using home automation software,
you can easily check scene membership and
eliminate unnecessary links.
If the above doesn’t work, perform a factory reset
on the Controller.
Responders are taking
a long time to respond
to I/O Linc.
I/O Linc may be sending
commands to a responder
that is no longer in use.
Commands for the unused
responder are being
resent and loading down
the signal.
Unlink any unused responders from I/O Linc.
HINT: If you are using home automation software,
you can easily check scene membership and
eliminate unnecessary Links.
If the above doesn’t work, perform a factory. See
Resetting I/O Linc to its Factory Default Settings.
I/O Linc is locked up.
A surge or excessive
noise on the power line
may have glitched it.
Unplug I/O Linc for 10 seconds and then reinstall.
If the above doesn’t work, perform a factory reset.
See Resetting I/O Linc to its Factory Default
Settings.
If you have tried these solutions, reviewed this Owner’s Manual, and still cannot resolve an issue you are having with
I/O Linc, please call: 866-243-8022
Specifications
General
Brand: INSTEON
Manufacturer Product No.: 2450, I/O Linc
UPC: 689076403542
Color: White
Warranty: 2 years, limited
Operation
Status LED: White (Bright when relay closed, dim when relay open)