Hach-Lange SIGMA SD900 Refrigerated Sampler and All Weather Refrigerated Sampler User Manual - Manual (Page 109)

107
SDI-12 Configuration for a Hydrolab Sonde
Click on the Define SDI Parameter Order button to configure the
order of available parameters for the SDI-12 interface. This will
open Define SDI Parameter Order window (
Figure 47 ), showing the
total available parameters in the left pane. The right pane displays
the selected parameter and its order position.
You can define your own parameter list from the available
parameter set and change the order using the up and down button
near the right pane. After completing the parameter selection and
setting the parameter order, click the OK button.
Figure 46 Address configuration