Reset configuration – Adder Technology AdderLink iPEPS User Manual
Page 40
Reset configuration
This option allows you to
completely reset the iPEPS.
To get here
1 Use the local keyboard and log on as the ‘admin’ user.
2 Press
(hotkeys may be different).
3 Select ‘Configuration’.
4 Select ‘Reset configuration’.
WARNING: This process will remove all settings and return the unit to use its
original state. A complete reconfiguration will be required before it can be used.
To reset the iPEPS configuration
1 With the RESET option highlighted, press
.
2 The first screen of the initial configuration process will be displayed. See