Resetting the configuration (dual access models), The ipeps asks for an unknown admin password – Adder Technology AdderLink iPEPS User Manual
Page 16
Resetting the configuration (Dual Access models only)
The iPEPS does not display the configuration sequence
If the iPEPS has been previously configured it may not automatically display the
first of the setup screens. In this case you have two options, either:
configuration screens separately
, or
• Reset the configuration:
To invoke a configuration reset by main menu
1 Using the locally connected keyboard and screen, log on as the admin user.
2 Select the ‘Configuration’ option.
3 Highlight the ‘Reset configuration’ option and press
.
A warning screen will be displayed, select the RESET option and press
.
4 The iPEPS will reset and then display the first of the four
.