Clear-Com HME DX300ES - Manual (Page 11)

8
NOTE: A fully charged battery can be kept in the base station as a backup in case of AC
power interruption.
If AC power is unavailable, the base station can operate on battery power
(See page 9).
Left
headset
connector
Right
headset
connector
BASE STATION
Antenna and AC Power Connections
1
Screw both antennas onto the connectors
on the back of the base station.
Tighten at 90° angle.
2
Set up base station where no objects are
blocking the line-of-sight from base station to the beltpacs.
If base station can not be set up with no objects in line-of-sight between
it and the beltpacs, install the antennas away from the base station.
See page 17 for remote antenna installation.
3
Plug power adapter into base station and screw nut onto connector,
then plug power cord into power adapter and electrical outlet.
4
Press POWER button to turn power on.
5
Plug headsets into base station, inserting headset plugs all the way into
connectors.
90 ° angle
Antenna
connectors
Power
adapter
Power
cord