Clear-Com CB-222 - Manual (Page 21)

17 Tempest®24 00 MasterBelt
The MasterBelt default is for Dynamic Slot Assignment. This means that when BeltStati ons log in to a MasterBelt, the
informati on about the BeltStati ons is displayed on the MasterBelt LCD screen in alpha-numeric order according to the
name of the BeltStati on. For example, “Dir” appears before “Light1,” which appears before “StgMgr,” but they can change
slots depending on which BeltStati ons are turned ON. If the default setti ngs are used, nothing is necessary.
Adjusti ng so that each BeltStati on always appears in the same positi on of the MasterBelt display is a two step process:
1. Advance to the MasterBelt’s “Slot Assignment” secti on of the “Tech Menu” and select Stati c .
2. In each BeltStati on, advance to the “Base Slot” secti on of the “Tech Menu” and adjust each BeltStati on to a diff erent
slot (1 – 5). The BeltStati on designated to slot 1 will always appear on the far left of the MasterBelt display, with slot 2
appearing in the next positi on to the right, and so on.
In Stati c Mode, if a BeltStati on is not turned ON, or is logged out due to being out of range, the MasterBelt LCD display
will not have a shadow box around the respecti ve slot number.
A Multi ple MasterBelt system that uses iSelect Roaming must choose to use “Dynamic” slots to ensure that BeltStati ons can
move from MasterBelt to MasterBelt when roaming.
Additi onal Setti ngs and Features
Below are additi onal MasterBelt and BeltStati on setti ngs that can be set based on individual preferences. None of these
adjustments are required and some features are limited to either the MasterBelt or BeltStati on:
• Select Base - BeltStati ons can be paired with up to 64 MasterBelts (or BaseStati ons); Press MENU, select “Select
Base” and choose the to enable that BeltStati on to access a respecti ve MasterBelt or BaseStati on.
• Lock Keys - to prevent inadvertent changes. Press MENU, select “Lock Keys” to access lock opti ons. Default setti ng
is unlocked.
• Menu Lock - allows you to lock individual users out of their respecti ve BeltStati on menu enti rely. Access can only be
regained by entering a 3-digit security key code (which is initi ally set at the MasterBelt) on each BeltStati on. Default
key code setti ng is
000 and menu lock is disabled.
» To set key code at MasterBelt: Press MENU, select Belt Setti ngs>Tech Menu>Belt Key; use volume knob to
scroll and set a key code. Press ENT to save.
» To enable “Menu Lock” at BeltStati on - Press MENU, select Lock Keys>Menu Lock
• Batt ery Alert - Enable or disable the audible “Batt ery Alert” tone in the headset; Press MENU, select “Batt ery” and
Enable or Disable . Default setti ng is Enable .
• LCD/LED - Dim the LCD and LEDs to be less conspicuous in a dark environment:
» To enable or disable “LCD Light”: Press MENU, select LCD/LED>LCD Light
» To adjust the LED brightness: Press MENU, select LCD/LED>Talk LEDs and select either High/Med/Low/Off .
• Talk Butt ons - Set the TALK butt ons to operate in Latch or Momentary mode or Disable them completely. Press MENU,
select Set Controls>Talk Butt ons>Talk # and select either Latch/Momentary/Disable . Default setti ng is Latch .
• Channel (CH) Select - determine which channels are accessible and audible per MasterBelt or BeltStati on. Unit must
be set to access at least one channel. Press MENU, select Set Controls>Ch Select and choose from the channel
confi gurati ons available. Default setti ng is access to all channels.
• Mic Gain - Refer to the secti on “Adjust Mic Gain” in this manual.
• Sidetone - Refer to the secti on “Adjust Sidetone” in this manual.