Clear-Com CB-222 - Manual (Page 12)

8 Tempest®24 00 MasterBelt
BeltStati on Overview
1- Volume- CH A and CH B
In Operati onal Mode, turning the Volume control adjusts the volume of the
audio. Volume indicators appear on the display during adjustment and are
expressed in Decibels (dB).
The Volume control has an opti on to be set to “Volume Press” where it requires
a “press and turn” to adjust the volume level. The “Volume Press” opti on can
be adjusted under the “Set Controls” secti on of the BeltStati on menu.
Pressing the Volume control in “Dual-listen” mode does nothing. In “Single-
listen” mode, pressing “CH A” enables channel A, and pressing “CH B” enables
channel B . The Volume control has a channel “Delay Switch” opti on which
requires the knob to be pressed and held slightly longer in order to switch from
one channel to the other. This feature can be enabled under the “Set Controls”
secti on of the BeltStati on menu.
In Menu Mode, turning either Volume control allows the user to scroll the
opti ons of the current menu screen. Pressing the Volume control selects the
opti on.
2- STAGE Butt on
The Stage Announce (STAGE) butt on has no functi onality when a BeltStati on is operati ng with a MasterBelt.
3- MENU Butt on
Pressing MENU while the BeltStati on is in Operati onal mode will select Menu Mode, and the Main Menu screen will be
displayed. Once in Menu Mode, pressing MENU again will act as an escape key and will back out of the current menu screen
moving the user up one level. Pressing the MENU butt on while at the Main Menu screen will exit Menu Mode and return
to Operati onal mode. The menu can be locked via a “Menu Lock” feature per BeltStati on.
4- ENTER Butt on
The ENTER butt on operates diff erently depending on the mode of the BeltStati on. In Menu Mode, pressing the ENTER
butt on selects the current menu opti on and is the same as pressing a Volume control. A menu item is not selected unti l the
ENTER butt on (or Volume control) is pressed.
The ENTER butt on can also acti vate Wireless ISO (wireless talk around), providing wireless communicati on isolated from
any connected wired intercom system.
5- LCD
While in Operati onal Mode, the LCD displays the status of the BeltStati on including the name of
the currently communicati ng MasterBelt, radio strength, batt ery level, and other data. The LCD
backlight and contrast can be adjusted from the LCD Adjustments menu screen under the LCD/
LED secti on of the BeltStati on menu.
6- CALL Butt on
The CALL Butt on sends call signal to any wireless BeltStati on on the same intercom channel. The Call signal will be routed to
intercom channels indicated by the user’s acti ve Talk butt on(s). Note: The TALK butt on must be enabled to send a call signal.
Operati onal Display