Clear-Com CB-222 - Manual (Page 10)

6 Tempest®24 00 MasterBelt
5- LCD
While in Operati onal Mode, the LCD displays the number of BeltStati ons currently in use with
the MasterBelt. In additi on, it includes the name of the MasterBelt, batt ery life remaining,
channel indicators and other data. The LCD backlight and contrast can be adjusted from the LCD
Adjustments menu screen under the LCD/LED secti on of the MasterBelt menu.
6- CALL Butt on
The CALL Butt on sends a call signal to any wireless BeltStati on on the same intercom channel. The Call signal will be routed
to intercom channels indicated by the user’s acti ve Talk butt on(s). Note: The TALK butt on must be enabled to send a call signal.
1- Rubberized Access Cover
The Rubberized Access Cover helps prevent dust, dirt and liquid from entering the MasterBelt
through the USB or the BeltStati on pairing connector. Keep this cover securely closed at all ti mes
to ensure the best possible seal.
2- USB Mini B Connector
The USB Connector is used to charge the MasterBelt with the supplied wall charger. In additi on,
the USB connect is used to update the fi rmware of the MasterBelt.
3- Pairing Connector
The Pairing Connector is used to pair the MasterBelt to BeltStati ons using the supplied 3.5mm
stereo mini connector.
1- Belt Clip
The Belt Clip enables the MasterBelt to be worn on the user’s belt or other clothing
item.
2- Power ON/OFF Butt on
The Power ON/OFF butt on is used to turn the MasterBelt ON or OFF. Press and hold
the Power ON/OFF butt on for two seconds to turn the MasterBelt ON. Press for
four seconds to turn the MasterBelt OFF.
3- Batt ery Compartment
The Batt ery Compartment holds either one Tempest Lithium-Polymer rechargeable
batt ery or (3) standard alkaline AA cells. To remove the batt ery door, press down on
the thumb markings and pull the batt ery door toward the bott om of the MasterBelt.
To remove batt eries from the batt ery compartment turn the MasterBelt batt ery
side down and tap the bott om of the MasterBelt on the palm of your other hand.
Please be careful to insert alkaline AA batt eries according to the marked polarity. All of the alkaline AA cells face the same
directi on. If the batt ery cover does not fi t or close properly, the batt ery may not be inserted correctly.
4- Headset Connector
The 4-pin XLR male headset connector mates with most Dynamic or Electret headsets that have 4-pin XLR female connectors.
This Headset connector allows a user to communicate in “Dual-listen” or “Single-listen” mode on either intercom channel.
Operati onal Display