Clear-Com ICS-1016E - Manual (Page 5)

Clear-Com Communication Systems
ICS 1008E/1016E Intercom Panel Instruction Manual i i i
IMPORTANT SAFETY
INSTRUCTIONS
For your safety, it is important to read and follow these
instructions before operating an ICS-1008E/1016E intercom
panel.
(1) WARNING: To reduce the risk of fire or electric shock, do not
expose an ICS-1008E/1016E intercom panel to rain or moisture. Do
not operate an ICS-1008E/1016E intercom panel near water, or place
objects containing liquid on it. Do not expose an ICS-1008E/1016E
intercom panel to splashing or dripping water.
(2) For proper ventilation, make sure ventilation openings are not
blocked. Install the ICS-1008E/1016E according to the directions in the
Installation Chapter of this manual.
(3) Do not install an ICS-1008E/1016E intercom panel near a heat
source such as a radiator, heat register, stove, or other apparatus
(including amplifiers) that produces heat. Do not place naked flame
sources such as candles on or near a panel.
(4) Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades, with one blade wider than the
other. A grounding-type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
(5) Protect the power plug from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the panel chassis.
(6) Only use attachments/accessories specified by Clear-Com
Communication Systems.
(7) Unplug the ICS-1008E/1016E panel during lightning storms or
when unused for long periods of time.
(8) Refer all servicing to qualified service personnel. Servicing is
required when:
• The ICS-1008E/1016E panel has been damaged in any way,
such as when a power-supply cord or plug is damaged.
• Liquid has been spilled or objects have fallen into the
ICS-1008E/1016E panel chassis.
• The ICS-1008E/1016E panel has been exposed to rain or
moisture.
• The ICS-1008E/1016E panel does not operate normally.
• The ICS-1008E/1016E panel has been dropped.
Please read and follow
these instructions
before operating an
ICS-1008E/1016E
intercom panel.