Clear-Com ICS-1016E - Manual (Page 16)

Clear-Com Communication Systems
ICS 1008E/1016E Intercom Panel Instruction Manual
1 - 1 0
program. When shipped from the factory, the page override level is
adjusted to the equivalent of half volume.
Headset Microphone Sidetone Control
This knob adjusts the headset sidetone level. Sidetone is the sound of
the user’s voice in his headset. When shipped from the factory, the
sidetone is adjusted for maximum sidetone.
Headset and Panel Microphone Gain Controls
These knobs adjust the gain of the headset and panel microphones.
The preamplifier gain of the panel and headset microphone can be
adjusted over a range of 0 to 20 dB. When shipped from the factory,
the headset microphone gain is set to 10 dB and the panel microphone
gain is set to 0 dB.
If two panels are talking to each other at the same time with the panel
microphone gain set to maximum, feedback may occur even if the
Speaker Mute (see “Speaker Mute Level Control” on page 1-9) is set to
maximum. In this case, it will be necessary to turn the panel
microphone gain down. Similarly, in some noisy environments it may
be necessary to turn the panel microphone gain down and have the
operator talk more closely into the microphone.
EXP-1016E REAR-PANEL CONNECTORS AND
CONTROLS
The EXP-1016E only has one male DB-9 connector to connect it to a
panel.
Note: A panel can only have one EXP-1016E connected to it.