Clear-Com RS-601 (No longer available) - Manual (Page 26)

2 4 R S - 6 0 1 B E L T P A C K
Talk Disable, Function 3
This function turns the talk button on or off. When off, the talk
button does not function.
Turn the talk button off when you wish to operate the beltpack as a
listen-only device.
To select “talk disable” for a channel:
1. Press and hold the setup button until the setup information
window displays a “P” and then release the button.
2. Repeatedly press the call button until “3” appears in the display.
3. Press the talk button to toggle “talk disable” either on or off.
The beltpack’s talk light reveals whether “talk disable” is on or off.
If the talk light is on, “talk disable” is on; if the talk light is off, is
off.
4. When you have made your selection, press the setup button to save
it and to exit setup, or press the call button to select other
functions to program.
If you do not press a button within five seconds, the beltpack exits the
setup program without making any changes.