Clear-Com RS-601 (No longer available) - Manual (Page 25)

2 3 R S - 6 0 1 B E L T P A C K
Latch Disable, Function 2
A beltpack’s talk button normally latches when you tap it twice. If
you select to disable this function, the talk button does not latch.
This setting is recommended if you use the call-on-talk feature, which
causes the beltpack to send a call signal each time you press the talk
button.
To select “latch disable” for a channel:
1. Press and hold the setup button until the setup information
window displays a “P” and then release the button.
2. Repeatedly press the call button until “2” appears in the display.
3. Press the talk button to toggle “latch disable” either on or off.
The beltpack’s talk light reveals whether “latch disable” is on or
off. If the talk light is on, “latch disable” is on; if the talk light is
off, “latch disable” is off.
4. When you have made your selection, press the setup button to save
it and to exit setup, or press the call button to select other
functions to program.
If you do not press a button within five seconds, the beltpack exits the
setup program without making any changes.