Clear-Com RS-601 (No longer available) - Manual (Page 12)

8 R S - 6 0 1 B E L T P A C K
Call Button
When you press the call button, a call signal is sent to all other
stations on the intercom line.
The call light glows red to indicate both outgoing and incoming call
signals.
Call Light
The call light illuminates when the beltpack sends or receives a call
signal.
Some onboard and computer programming options can change the
function of this light. See the chapter “Customizing Your Beltpack”
for more information.
Setup Information Window
When you press and hold the setup button for more than three
seconds, the setup information window lights up and displays current
beltpack programming information.
If you do not select or program a feature within five seconds, setup is
cancelled, and the setup information window dims to indicate that
the setup mode is no longer available. This feature prevents changes if
the setup button is pressed accidentally.
For more information on programming features from your beltpack,
see the chapter “Customizing Your Beltpack.”
4
5
6