Clear-Com RS-601 (No longer available) - Manual (Page 23)

2 1 R S - 6 0 1 B E L T P A C K
SETTINGS YOU CAN CUSTOMIZE
Table 1 shows the beltpack functions you can customize with
onboard controls. Note than each function is assigned a number,
which you will refer to for programming.
Table 1: Functions You Can Edit With Onboard Controls
Before you program the beltpack with the onboard controls, the
beltpack must be connected to an intercom line and receiving power,
and must not be connected to a computer.
FUNCTION # NAME STATUS
Function 1 Mode Select 1,2,3,4
Function 2 Latch disable on or off
Function 3 Talk disable on or off
Function 4 Call-on-talk on or off
Function 5 Electret mic (headset) on or off
Function 6 Call tone (in earphone) on or off
Function 7 Electret Mic Hi-Lo hi or lo
Function L Locks out onboard access on or off