AT&T EP5632 - Manual (Page 69)

65
Telephone operations
Conferencing HOME and CELLULAR calls
While you are on a
HOME or CELLULAR call,
and the other line is on hold or in use, you can
conference the lines using a handset or telephone
base. When conferenced, you can end the
HOME,
CELLULAR, or conference call separately.
To conference both HOME and CELLULAR calls:
1. Press the OPTIONS softkey on the handset or
telephone base.
2. Press the UP and DOWN NavKeys to select Conf.
both lines.
3. Press
MENU
/SELECT on the handset or the SELECT
softkey on the telephone base. The HOME and
CELLULAR lines will now be conferenced.
To see a list of options for the handset or telephone
base while on a conference call:
1. Press the OPTIONS softkey on the handset or
telephone base. You can then select:
• Hold Conf. call - holds the conference call.
• End Home call - ends the HOME line call.
• End Cell call - ends the CELLULAR line call.
• End Conf. call - ends the conference call.
2. Press the UP and DOWN NavKeys to highlight
your choice, then press
MENU
/SELECT on the
handset or the SELECT softkey on the telephone
base.
To end a conference call:
• Press OFF/
CANCEL
on the handset or return the
handset to the telephone base or charger.
• Press HOME or CELLULAR on the telephone
base
–OR– –OR–
• Use the End Conf. call option described in the
above section.
NOTE: The
OPTIONS softkey is
available when there
are calls on both
HOME and CELLULAR
lines
NOTE: Ending a
conference call on a
handset or telephone
b a s e w h e n o t h e r
h a n d s e t s o r t h e
telephone base are
on the conference
call, will not end the
conference call, unless
you use the
End Conf.
call option described
on the right.