AT&T EP5632 User Manual

Page 57

System setup

Call Screening
By default,

Call Screening is on. Call Screening

allows you to listen to a caller leaving a message
on the answering system.

To change this feature's setting:

1. Press the

MENU softkey on the telephone base

to enter the main menu.

2. Press the

UP and DOWN NavKeys to highlight

Answering System, then press the SELECT
softkey to enter the

Answering System menu.

3. Press the

the

DOWN NavKey to highlight Call

Screening, then press the SELECT softkey.

4. Press the

UP and DOWN NavKeys to highlight

to highlight

On or Off, then press the SET softkey to save the
setting.

Remote Code
By default, the

Remote Code is 5000. To access

your answering system remotely from any touch
tone phone (page 92), you need to enter the four-
digit remote access code.

To change the remote access code:

1. Follow steps 1 through 2 in the above section.
2. Press the

UP and DOWN NavKeys to highlight

Remote Code, then press the SELECT softkey.

3. Enter your desired four-digit code by using the:

Enter your desired four-digit code by using the:

• Dial pad keys (

0-9) to enter a code.

•

LEFT and RIGHT NavKeys to move the cursor

left and right.

•

UP and DOWN NavKeys to change the digit.

4. Press the

SET softkey to save your setting.

Answering System
Record Memo

Number of Rings

Call Screening

SELECT

Call Screening

POn

Off

SET

Answering System
Number of Rings

Call Screening

Remote Code

SELECT

SET

Remote Code

000