AT&T EP5632 User Manual

Page 33

Bluetooth

Add an active device
If you have only one active device, you can add
another paired device to the

Active Devices list,

however, you can only have one headset on the
Active Devices list.

To add an active device:

1. Press the

MENU softkey on the telephone base

while in idle mode.

2. Press the

UP and DOWN NavKeys to highlight

Bluetooth, then press the SELECT softkey to
enter the

Bluetooth menu.

3. Press the

UP and DOWN NavKeys to highlight

Active Devices, then press the SELECT softkey.

4. Press the

UP and DOWN NavKeys to select

an empty device number, then press the

ADD

softkey.

5. Press the

UP and DOWN NavKeys to select one

of the paired devices.

6. Press the

SELECT softkey. The paired device

selected will be added to the

Active Devices

list.

Change PIN (of the telephone base)
The PIN is exchanged between the telephone base
(default is

0000) and your Bluetooth device(s).

To change the PIN:

1. Press the

MENU softkey on the telephone base

to enter the main menu.

2. Press the

UP and DOWN NavKeys to highlight

Bluetooth, then press the SELECT softkey to
enter the

Bluetooth menu.

3. Press the

UP and DOWN NavKeys to highlight

Change PIN, then press the SELECT softkey.

4. Enter your desired four-digit code by using:

• Dial pad keys (

0-9).

•

LEFT and RIGHT Navkeys to move the cursor

left or right.

•

UP or DOWN NavKeys to change the number

(

0-9).

5. Press the

SET softkey to save your setting.

SELECT

Bluetooth
Active Devices

Paired Devices

Change PIN

SET

Change PIN

000

ADD

Add Device

Mary's Headset

John's Cell

SELECT

INFO

NOTE: Devices on

Devices on

the

Active Device list

temporarily disconnect
during this process, but
automatically reconnect
afterwards. It may take up to
two minutes to reconnect.

Active Devices

X 1 My Headset

2 (empty)

Main Menu
Call Log

Answering System

Bluetooth

SELECT