Managing your devices – AT&T EP5632 User Manual

Page 29

Bluetooth

Managing your devices

Once you have paired a Bluetooth device, you can
rename, delete, and view the device's information
on the

Paired Devices list.

Once a Bluetooth device is connected to the
telephone base, you can replace, remove or
disconnect the device from the

Active Devices list

(page 27), and view the device's status information
(page 27).

Paired Devices
All paired devices are stored on the

Paired Devices

list. Up to eight devices (any combination of cell
phones and headsets) can be paired with the
telephone base.

If a device is successfully paired, the icon (for
cell phone) or (for headset) and the name of the
device will be shown on the

Paired Devices

list.

Rename a paired device

1. Press the

MENU softkey on the telephone base

while in idle mode.

2. Press the

UP and DOWN NavKeys to highlight

Bluetooth, then press the SELECT softkey to
enter the

Bluetooth menu.

3. Press the

UP and DOWN NavKeys to highlight

Paired Devices, then press the SELECT softkey.

4. Press the

UP and DOWN NavKeys to highlight

the name of the device to rename.

5. Press the

RENAME softkey to rename a device.

• Press the

LEFT and RIGHT Navkeys to move

the cursor left and right.

• Press the

ERASE softkey to delete highlighted

characters.

• Use the dial pad to enter the name (up

to 16

characters). See the character chart on page
70 for more information on how to enter a
name.

6. Press the

DONE softkey to save the setting.

NOTE: To use a

To use a

paired device, it must be
connected and on the
Active Devices list
(page 27).

NOTE: Only the

first 16 characters of the
device name appears on
the

Paired Devices list.

DONE

ERASE

Paired Devices

John's

Cell

Mary's Cell

Mary's Headset

RENAME

INFO

DELETE

Rename Device

Edit Name

ohn's Cell