AT&T EP5632 User Manual

Page 51

System setup

Ringer Volume
You can choose one of the ringer volume levels on
the telephone base. The ringer can also be turned
off so the telephone base will not ring during
incoming calls.

To adjust the telephone base ringer volume:

1. Press the

MENU softkey in idle mode to enter

the main menu.

2. Press the

UP and DOWN NavKeys to select

Ringers, then press the SELECT softkey to enter
the

Ringers menu.

3. Press the

UP and DOWN NavKeys to highlight:

•

Ringer for HOME - set the ringer volume and
melody for the

HOME line.

•

Ringer for CELL 1 - set the ringer volume
and melody for the first connected cellular
phone on the

Active Devices list (page 27).

•

Ringer for CELL 2 - set the ringer volume and
melody for the second connected cellular
phone on the

Active Devices list (page 27).

4. Press the

SELECT softkey.

5. Press the

SELECT softkey again to select Ringer

Volume.

6. To set the ringer volume:

• Press the

UP and DOWN NavKeys, or

• Press the

LEFT and RIGHT NavKeys, or

• Press the

VOLUME on the telephone base.

-OR-

To turn off the telephone base ringer:
• Press the

OFF softkey, or

• Press the

DOWN NavKey, LEFT NavKey, or

DOWN volume key until Ringer Off is shown
on the display.

7. Press the

SET softkey to save the setting.

SET

Ringer Volume

Ringer Off

NOTE: Even if the

ringer volume is off, the
telephone base or handset
will ring at the lowest
volume setting during an
incoming intercom call.

Ringers

Ringer for HOME

Ringer for CELL1

Ringer for CELL2

SELECT

SET

Ringer Volume

Ringer for HOME

Ringer Volume

Ringer Melody

SELECT

OFF