Hellwig Power Lift 6097 - Manual (Page 17)

559-734-7451 800-367-5480 FAX 559-734-7460
22. Locate compressor on forward side of spare tire crossmember on passenger
side of vehicle as shown in photo. Mark holes for compressor and drill qty 4
3/16” (.188”) holes as shown in photo. Install compressor as shown using hard-
ware supplied with compressor.
23. Locate Relay mounting bracket as shown on forward side of spare tire cross-
member on driver side as shown in photos. Mark holes and drill qty (2) 1/4”
holes. Install Relay bracket as shown using 1/4” bolts and locknuts. Attach hose
from compressor to bulkhead. Make sure to apply pipe sealant or Teflon tape to
threads and take care to tighten only the specified fitting to avoid damaging check
valve.
Tighten this
part of fitting
only to avoid
damaging
check valve
Braided hose
6097 ( R-6097) 10/03/2007