beautypg.com

Part c compressor installation – Hellwig Power Lift 6097 User Manual

Page 16

background image

559-734-7451 800-367-5480 FAX 559-734-7460

20. Prepare the compressor for mounting by HAND-TIGHTENING the air filter
into the port on the compressor. If necessary, adapters are provided with the com-
pressor to connect nylon hose from the tank to the compressor hose. Do not re-
move the braided hose or check valve from the compressor. If the vehicle will
be operated in a manner where the compressor may draw in water, the air filter
should be remotely mounted with components included with compressor.

21. Attach 1/4” NPT bulkhead to tee as shown in photo. Attach 3/8” MPT elbow
to tee. Attach relay to tee as shown. Use pipe sealant or Teflon tape (provided)
as required.

!/4” NPT Bulkhead

Relay

3/8” MPT Elbow

Part C Compressor Installation

Air Filter

6097 ( R-6097)

10/03/2007