Hellwig Power Lift 6097 - Manual (Page 11)

559-734-7451 800-367-5480 FAX 559-734-7460
14. Attach leveling valve bracket to valve as shown using 1/4” nylon locknuts
and washers. Orient valve at angle shown in photo. The valve can be adjusted
using the slot to give best linkage alignment Tighten to 7 ft-lb.
15. Attach leveling valve linkage pins to valve and axle bracket in orientation shown.
Make sure that the axle bracket and linkage pin will not interfere with brake lines. Re-
locate brake lines as required. Tighten nuts to 8-10 ft-lb.
Nut/washer not shown to
illustrate stud orientation.
6097 ( R-6097) 10/03/2007