Hellwig Load Pro Series 9655 - Manual

INSTALLATION INSTRUCTIONS
Thank you for purchasing a quality Hellwig Product.
PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR INSTALLATIONPROCEDURES.
9655 ( R-9655) 7/07/09
SAFETY: PARK YOUR VEHICLE ON A FLAT LEVEL SURFACE, SET THE PARKING AND CHOCK THE FRONT TIRES. IF
REAR OF VEHICLE MUST BE RAISED, PLACE FRAME ON JACK STANDS BEFORE WORKING UNDER VEHICLE.
NOTE: THIS KIT INCLUDES LOCKNUTS WHICH REQUIRE TIGHTENING WITH A WRENCH AFETR BEING STARTED BY
HAND.
IMPORTANT NOTE: IF YOUR VEHICLE IS EQUIPED WITH A FACTORY CONTACT OVER LOAD IT MUST BE REMOVED
BEFORE INSTALLING THE NEW HELPER SPRINGS.
IMPORTANT NOTE : HELLWIG HELPER SPRINGS ARE DESIGNED TO INCREASE THE “LEVEL LOAD” CARRYING
CAPACITY OF YOUR VEHICLE. NEVER LOAD THE VEHICLE THAT THIS UNIT IS INSTALLED ON BEYOND THE
MANUFACTURER’S MAXIMUM GROSS VEHICLE WEIGHT RATING.
READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR INSTALLTION
559-734-7451 800-367-5480 FAX 559-734-7460
Step Bracket
Retainer Clip
3/8 Bolt and Locknut
Leave Loose for Ad-
justment later
Bolts will point
inboard when in-
stalled on vehicle