Hellwig Air 6290 User Manual
Hellwig For the car
INSTALLATION INSTRUCTIONS
6090 Air Suspension Kit (pat. pending)
1999-2006 Tahoe, Suburban, Avalanche, Yukon
Thank you for purchasing a quality Hellwig Product.
PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING
YOUR INSTALLATION
IMPORTANT NOTES
IF EQUIPPED WITH FACTORY PREMIUM RIDE OR
AUTOLEVEL SUSPENSION, CONTACT HELLWIG
PRODUCTS CO. FOR FURTHER INSTRUCTIONS.
DO NOT
INFLATE ANY AIR SPRING ASSEMBLY UNLESS IT HAS BEEN
PROPERLY INSTALLED ON VEHICLE.
DO NOT
INFLATE AIR SPRINGS OVER 100 PSI
A MINIMUM OF
5-10
PSI MUST BE MAINTAINED IN AIR SPRINGS
AFTER INSTALLATION FOR WARRANTY TO BE VALID. FAILURE TO
KEEP MINIMUM PRESSURE IN AIR SPRINGS WILL VOID WARRANTY.
THIS UNIT IS DESIGNED TO INCREASE THE LEVEL LOAD CARRYING
CAPACITY OF YOUR VEHICLE. NEVER LOAD THE VEHICLE THIS
UNIT IS INSTALLED ON BEYOND THE MANUFACTURER’S MAXIMUM
GROSS VEHICLE WEIGHT RATING.
OVERINFLATION AND IMPROPER USE MAY RESULT IN PERSONAL
INJURY AND/OR DAMAGE TO YOUR VEHICLE AND PROPERTY.
559-734-7451 800-367-5480 FAX 559-734-7460
6090 ( R-6090)
03/09/07