Fluid Components International Quality Assurance Manual User Manual
Page 22
DOCUMENT NUMBER
07QA070003
SUBJECT
Quality Manual
CAGE CODE
64818
DATE
10-8-2012
SECTION
-
PAGE
xxii
CURRENT
REVISION
L
Designated Manufacturing Inspection Representative (DMIR)
The DMIR shall be responsible to verify conformity by inspecting parts to be released per
the Production Approval Holder (FCI). The release is to conform to various sections of
14 CFR 183.31 as authorized and limited to the Official Certificate of Authority. The
authorization is limited to the Function Codes 01, 03, 05, 06, and 07.
Return-to-Service Inspector
The Return-to-Service Inspector shall be responsible for returning Aerospace PMA parts
used for aircraft and has been rebuilt or altered under the FAA Part 43, section 43.3(j).
Authorization is based on FCI‟s Production Certificate and FAA-Parts Manufacturing
Approval. Return-to-Service Aerospace PMA parts follow the procedure 04QA704105.
Personnel authorized to Return-to-Service under this provision are limited to the
“Personnel Authorized for Return –to-Service” attached to this manual.