Fluid Components International Quality Assurance Manual User Manual
Page 21

DOCUMENT NUMBER
07QA070003
SUBJECT
Quality Manual
CAGE CODE
64818
DATE
10-8-2012
SECTION
-
PAGE
xxi
CURRENT
REVISION
L
Production
The Production groups perform the fabrication and assembly of shippable product in
accordance with applicable instructions, procedures, and drawings. Production is also
responsible to record the work and processing performed as required by these documents.
Test
Test shall perform all calibrations of instruments supplied to the customer. All
calibrations and tests shall be in accordance with the applicable contract requirements and
approved procedures. Test shall also perform such other tests as requested by the
Engineering, Production, or Quality Assurance Departments.
EX Representative
The EX Representative shall have the following responsibilities and authority:
Effective monitoring, dissemination, review and implementation of the latest applicable
technical knowledge
Effective coordination of activities with respect to products intended for use in
potentially explosive atmospheres
To liaise with the notified bodies in case of changes to the design in the EC-Type
Examination Certificate and the technical documentation
To liaise with the notified body responsible for the assessment of the quality system in
case of changes to the quality system, together with the Quality Assurance representative.
Authorize the initial approval and changes to related drawings
Authorize concessions if it does not take the product outside the design as defined in
the EC-Type Examination Certificate
Communicate information to the customer of special conditions or limitations
Participate in the Management Review Meeting