Burkert Type 8056 User Manual
Page 4
SE56
4
INTRODUCTION
These operating instructions and description of device functions are provided for the scope
of supply. They could be modified without prior notice. The improper use, possible
tampering of the instrument or parts of it and substitutions of any components not original,
makes the warranty to decay automatically.
The transmitter is to be used only to be coupled directly with a sensor to realize a
measuring device, flow meter, that is to be used for measuring the flow of conductive
liquids in closed pipes with conductivity greater than 5μS/cm.
It is forbidden the reproduction of the present manual and of possible software supplied.
SAFETY INFORMATIONS
Any use other than described here affects the protection provided by the manufacturer and
compromises the safety of people and the entire measuring system and is, therefore, not
permitted.
The manufacturer is not liable for damaged caused by improper or non-designated use.
1)
Transport the measuring device to the measuring point in the original packaging. Do
not remove covers or caps until immediately before installation. In case of cartons
package it is possible to place one above the other but no more than three cartons.
In case of wooden package do not place one above the other.
2)
Disposal of this product or parts of it must be carried out according to the local
public or private waste collection service.
3)
The transmitter must only be installed, connected, commissioned and maintained by
qualified and authorized specialists (e.g. electrical technicians) in full compliance with
the instructions in these Operating Instructions, the applicable norms, legal
regulations and certificates (depending on the application).
4)
The specialists must have read and understood these Operating Instructions and
must follow the instructions they contain. If you are unclear on anything in these
Operating Instructions, you must call the service. The Operating Instructions provide
detailed information on the transmitter.
TRANSMITTER
SENSOR