Burkert Type 1094 - Manual (Page 14)

12 - 1094_400
english
The gas meter has to be connected before the suction pipe to make “dry”
measurements or an automatic self adaptation. Due to this air is sucked
through the gas meter into the storage tank.
It is important to connect the gas meter in the right direction. An arrow on
the gas meter signs the operating direction.
5 HOW TO USE THE SELF ADAPTATION SETS
5.1 “Wet” Measurements
The gas meter has to be connected between simulation tank and suction
pipe to make “wet” measurements or an adaptation of a manually
adjustable system. Due to this the displaced vapor is sucked through the
gas meter into the storage tank.
It is important to connect the gas meter in the right direction. An arrow on
the gas meter signs the operating direction.
Figure 10: Connection of the gas meter during “wet” measurements
5.2 “Dry” Measurements
Figure 11: Connection of the gas meter during “dry” measurements