Burkert Type 8635 User Manual
Page 6
SETTINGS ON COMMISSIONING
SETTINGS ON COMMISSIONING
SETTINGS ON COMMISSIONING
MANUAL or AUTOMATIC mode
Changing the internal setpoint
(process controller only)
In the AUTOMATIC mode:
• Press the
or
key for 3 seconds.
• Adjust the process setpoint with the
or
key.
• Confirm the entry with the
key and return to the
operating mode.
Within Level 1, you can change between MANUAL and
AUTOMATIC mode by pressing the
key.
Quitting the configuration mode
Select the function
END with the
key.
Confirm the selection with the
key.
Changes to operating mode.
Setting up the process control (option) - level 2
evel 3
on of the
UNE.
P.CO DBND
P.CO PARA
P.CO SETP
P.CO INP
P.CO FILT
P.CO SCAL
P.CO END
P.CO TUNE
P.CO PARA
Enter PID controller
parameters
K
p
, T
n
, T
v
and X0
P.CO INP
Type of signal
for the process
value
(in S/HART version only)
The function
P.CONTRL was transferred to Level 2 and can
be parametrized there as follows:
Using the
key, select
P.CONTRL.
ce with
ce with
with the
FIGURES: Each individual digit:
increment,
decrement.
Confirm overall value
and each individual
digit:
Profibus PA bus configuration
The SIDE
Control profibus PA can be controlled via Profibus PA
from a central automation system (e.g. process control system).
The momentary valve position is reported via the bus.
For detailled information on commissioning a Profibus PA
branch, we recommend the
Profibus Commissioning Guidelines
by the PROFIBUS Users Organization (PUO).
Setting the device address
• Configuration and parametrization are done locally via the
menu functions or via the bus.
• The settings of the DIP switches are read in only on
switching on the device.
These and all other software functions, as well as the
GSD files are described in detail in the operating
instructions for SIDE
Control Type 8635 on the CD
supplied.
e currently
OTUNE
OTUNE
Operating
mode
Yellow LED
(in the MANUAL /
AUTOMATIC key)
Display
AUTOMATIC
flashes
An apostrophe (') runs continuously from
left to right (see Display in AUTOMATIC
mode )
MANUAL
off
Last display set in AUTOMATIC mode.
MANUAL mode
AUTOMATIC
mode
Open valve
Close valve
Hold down up key and
simultaneously press down key:
fast opening
Hold down down key and
simultaneously press up key:
fast closing
Functions
The valve
controls according
to the setpoint.
DIP 1
DIP 2
DIP 3
DIP 4
DIP 5
DIP 6
DIP 7
2
0
2
1
2
2
2
3
2
4
2
5
2
6
ON
ON
OFF
OFF
OFF
OFF
OFF
3
:
OFF
OFF
ON
ON
ON
ON
ON
124
ON
OFF
ON
ON
ON
ON
ON
125
125
OFF
ON
ON
ON
ON
ON
ON
126
126
Permissible
address
range
Address
OFF
Enter device address with DIP switches
ON
Enter device address via the bus
DIP 8