Burkert Type 8631 - Manual

Please co
• In the c
risk of e
German
• When m
circuit, t
certifica
• Always
Please observe the notes in these operating
instructions together with the conditions of use and
permitted data that are specified in the data sheet Type 8631, in
order that the device will function perfectly and remain operable
for a long time. On non-observance of these notes and
unauthorized interference with the device, we will refuse all
liability and the warranty on device and accessories will become
void! The device serves exclusively to actuate pneumatically
operated process valves. Any other use or use exceeding the
specific scope is considered to be
non-intended use. Bürkert
will not be liable for any damage resulting therefrom. The risk will
be borne by the user.
Intended use
This device contains electronic components that are sensitive to
electrostatic discharge (ESD). Contact to electrostatically charged
persons or objects will endanger these components. In the worst
case, they will be immediately destroyed or will fail after
commissioning. Observe the requirements of EN 100 015 - 1 in
order to minimize the possibility of, or avoid, damage from
instantaneous electrostatic discharge. Also take care not to touch
components that are under supply voltage.
ATTENTION
EXERCISE CAUTION ON HANDLING!
ELECTROSTATICALLY SENSITIVE
COMPONENTS / MODULES
• Keep to standard engineering rules in planning the use
of and operating the device!
• Installation and intervention for maintenance work are
only allowed by qualified personnel using suitable tools!
• Observe the current regulations on accident prevention
and safety for electrical devices during operation and
mainte-nance of the device!
• Before interfering with the system, always switch off the
voltage!
• Note that in systems under pressure, piping and valves
may not be loosened!
• Take suitable precautions to prevent inadvertent
operation or damage by unauthorized action!
• After interruption of the electrical or pneumatic supply,
make sure the process is restarted in a well-defined,
controlled manner!
Safety notes
Notes fo
W
fo
Notes fo
Quic
kstar
t
Installation and Operation
GENERAL NOTES DEVICE
On-off valve with
TOP Control ON/OFF
GENERAL NOTES
These instructions explain with the aid of an example the
commissioning of a single-acting on-off valve.
A detailed description of the device, including the external
connection of the terminals and the data bit configuration and
LED displays, can be found in the operating instructions for the
TOP
Control ON/OFF Type 8631, as well as in the operating
instructions for the process valves on the accompanying CD.
• Take su
from the
• No com
outputs
the limit
the data
• Work ou
carried
precaut
the circu
which th
necessa