Burkert Type 6114 - Manual (Page 5)

english 16
Electrical Installation
Important information for the problem-free functio-
ning of the device:
The device is designed for battery voltage.
Use only direct voltage, residual ripple max. 10%!
Electrical connection:
Note the voltage and current type as specified on the type
label.
Ensure that the polarity is correct, otherwise
the device will not function!
Observe color coding: (black / red)
Connection with direct voltage
With plug and cable
english 17
MAINTENANCE, MALFUNCTIONS
The valve is maintenance-free under normal operating
conditions.
If the exterior is very dirty, it is recommended to clean it
with suitable cleaning agents. If required, determine the
suitability of the cleaning agent by conducting a test.
Malfunctions
If malfunctions occur, check
→
the line connections,
→
the operating pressure,
→
the power supply and valve control.
If the valve still does not switch, please contact your
Bürkert Service.
english 18
PACKAGING, TRANSPORT,
STORAGE
NOTE!
Transport damages!
Inadequately protected equipment may be damaged
during transport.
• During transportation protect the device against wet
and dirt in shock-resistant packaging.
• Avoid exceeding or dropping below the permitted
storage temperature.
Incorrect storage may damage the device.
• Store the device in a dry and dust-free location!
• Storage temperature: -20 – 65 °C.
DISPOSAL
→
Dispose of the device and packaging in an environmen-
tally friendly manner.
NOTE!
Damage to the environment caused by device compo-
nents contaminated with media.
• Observe the currently valid regulations on disposal
and the environment in order to prevent damage to the
environment.
• Observe national waste disposal regulations.
Type 6114